Clearance Specials
  • Apollo 600 High Pressure (HP)/Low Pressure (LP) Supplied-Air Respirators

    The CLEMCO APOLLO 600 HIGH PRESSURE SUPPLIED AIR RESPIRATOR is a type CE, continuous-flow respirator as defined by the National Institute for Occupational Safety and Health (NIOSH) for abrasive blasting and is designed to be used with a respirable compressed air source.

    OVERVIEW:

    The CLEMCO APOLLO 600 High Pressure [HP] Supplied Air Respirator is designed for use with compressed air. 
    It meets OSHA standards for respiratory protection and air noise limitations. 
    It protects the blast operator’s head from rebounding abrasive and impact hazards. 
    In addition, the Apollo 600’s heavy-duty cape protects the operator’s upper body from rebounding abrasive.

    REQUIREMENTS for OPERATION:

    • A source of Grade D level (or better) compressed breathing air, as defined by the Compressed Gas Association specification G-7.1 
    • Sufficient volume of compressed air for breathing: 15 cfm at 65 to 100 psi when using ACV; or 20 cfm at 90 to 100 psi when using a CLEMCO ClemCool, CAT, or CCT air-control devices. 
    • A breathing-air filter, such as CLEMCO CPF, to remove oil mist, moisture, particles, and odors 
    • Carbon monoxide monitor and alarm, such as CLEMCO’s CMS-4. 
    • Protective clothing, and hearing and eye protection.

    APPROVALS and CERTIFICATIONS:

    • NIOSH-approved Type CE continuous flow supplied-air respirator 
    • NIOSH approval no. TC-19C-130 • OSHA Assigned Protection Factor: 1000 x PEL for hazardous substances 
    • ANSI Z89.1-2003 Type 1, Class G protective helmet (hard hat) 
    • ANSI Z 3.19: Noise Reduction Rating— 8 dB (with web suspension), 9 dB (with DLX suspension) 

  • Replacement Parts for Apollo 60 High Pressure (HP) Supplied-Air Respirator System
  • Apollo 20 Low Pressure (LP) Supplied-Air Respirators

    For use with compressed air source.

    All Apollo 20's come with DLX and web suspensions; DLX suspension installed.

    The Occupational Safety and Health Administration (osha) has Assigned Apollo Helmets a Protection Factor of 1,000 Times the Exposure Limit for Lead Dust.

  • Constant-Flow Connectors (CFC)

    For LP and HP model respirators

  • Apollo Air Control Valves (ACV)
  • Inner Lens, 0.040 Inch (in), (5 Pack)

    Apollo 60/600 HP and LP Lenses
    Lenses sold in packs only. Individual lens stock numbers shown for reference only.

  • Image

    Value-pack Replacement Lenses (Value-pack lenses do not qualify for quantity discounts.

  • Clem-Cool Air-Conditioners
  • Most Sought Parts(03578)/(04410)
  • Image
  • CPF-20 Breathing-Air Filters for HP Model Respirators

    Breathing-air filter for one or two operators.

  • CPF-80 Breathing-Air Filters for HP Model Respirators

    Breathing-air filter for up to four operators.