Clearance Specials
Request Information
For lightweight media (less than 140 lbs per cu ft)

M-Section® Systems include:
Recovery assembly, 2000 lbs per square foot grating, 900 cfm media reclaimer with wear plate and externally-adjustable vortex cylinder, dust collector to ventilate the reclamation system, 6 cu ft stationary blast machine with 1-1/4" piping, flange and umbrella, AQV abrasive metering valve, TLR-300 remote controls with ACS, 6 cu ft media storage hopper, 50 ft coupled Supa blast hose, TXP-6 nozzle, pressure regulator, and 1-1/2" air filter.
Unit of Measure

Specifications

Brands

 N/A Apollo Clemco®

Length

 N/A 12 ft

Grating Rating

 N/A 2000 lb/ft²

Storage Hopper Size

 N/A 6 ft³

Includes

Includes

 N/A
  • Abrasive/media to be used: Lightweight abrasives such as glass bead, alox up to 36 grit, others less than 140 lbs/cu ft
  • Upcharge for 60-degree conical bottom on blast machine and M-section®s: Option: For plastic media and starch media applications
  • Recovery unit: M-Section® recovery assembly
  • Surface-mount ramp plates order separately
  • Media reclaimer for pneumatic recovery: 900 cfm with wear plate and adjustable vortex cylinder
  • Dust collector: Ventilates media reclaimer. Separate blast room dust collector must be ordered.
  • Industrial blast machine: 6 cu ft Stationary Blast Machine with fine-mesh Sentinel Metering Valve
  • Operator safety equipment order separately
  • Electrical control panel order separately
  • Start-up supervision order separately

Additional Information

Additional Information

 N/A Recovery system technologies are engineered to suit specific abrasive/media types. Best performance is achieved when the recovery technology is suitable for the abrasive/media to be used and when a dedicated dust collector is installed to ventilate the abrasive/media cleaning system. Abrasive cleaner/reclaimer dust collection is especially critical when using aggressive abrasives, such as, aluminum oxide, silicon carbide, garnet, and others.

Important Note

Important Note

 N/A Blast Media: When ordering, advise media type and mesh-size; this information is critical to ensure equipment is configured for the application.

Dust Collection: The dust collector provided is to ventilate the media reclamation system. A separate dust collector must be installed to ventilate the blast room. The blast room dust collector must be ordered separately.

Operator Safety Equipment: Must be ordered separately.