Clearance Specials
Flex™ Base Units with Millennium ACS Pneumatic Remote Controls
Flex™ units are for blasting at pressures from 50 to 120 psi. Low Pressure (LP) Flex™ units have an extended blasting pressure range from 5 to 120 psi. LP units allow frequent start/stop, maintaining lower blast pressure.
All base units come with two injector bodies (choice of 1-1/4" fine thread or Contractor 50mm thread); one to be located at the metering valve and an alternate that can be installed at the nozzle. Always observe appropriate nozzle-orifice-to-blast hose size ratio when choosing nozzle for use with the Flex™.
Flex™ units are for blasting at pressures from 50 to 120 psi. Low Pressure (LP) Flex™ units have an extended blasting pressure range from 5 to 120 psi. LP units allow frequent start/stop, maintaining lower blast pressure.
All base units come with two injector bodies (choice of 1-1/4" fine thread or Contractor 50mm thread); one to be located at the metering valve and an alternate that can be installed at the nozzle. Always observe appropriate nozzle-orifice-to-blast hose size ratio when choosing nozzle for use with the Flex™.
Unit of Measure
Specifications
Brands |
N/A Apollo Clemco® |
Thread Type |
N/A 1-1/4 in. |
Pressure |
N/A 50 to 120 psi |
Weight |
N/A 1,575 lb |
Includes |
N/A Packages include Flex™ Base Unit plus 50ft x 1-1/4" ID Supa™ hose fitted with nylon holder and nylon coupling, 7/16"-orifice silicon-carbide-lined rubber jacketed nozzle, Apollo 600 HP DLX NIOSH-approved supplied-air respirator, ClemCool™ air conditioner, CPF-20 breathing-air filter, 50ft respirator hose, APL-600 outer lenses (pk of 25), APL-600 intermediate lenses (pk of 5), 1 pair leather gloves, abrasive trap screens (6), coupling gaskets (pk of 10), nozzle washers (pk of 10), and nylon ties (8). |
