Kleen Blast
Kleen Blast
Tacoma, Washington 1448 St. Paul Avenue, Tacoma, WA 98421
Portland, Oregon 3747 North Suttle Road, Portland, OR 97217
Hayward, California 30028 Industrial Pkwy., S.W. Hayward, CA 94544
Rancho Cucamonga, California 9871 8th St. Rancho, Cucamonga, CA 91730
Chula Vista 676-B Moss Street, Chula Vista, CA 91911
Phone: 800-553-3625
Email: Info@kleenblast.com
Website: www.kleenblast.com
Print Back
For lightweight media (less than 140 lbs per cu ft)

M-Section® Systems include:
Recovery assembly, 2000 lbs per square foot grating, 900 cfm media reclaimer with wear plate and externally-adjustable vortex cylinder, dust collector to ventilate the reclamation system, 6 cu ft stationary blast machine with 1-1/4" piping, flange and umbrella, AQV abrasive metering valve, TLR-300 remote controls with ACS, 6 cu ft media storage hopper, 50 ft coupled Supa blast hose, TXP-6 nozzle, pressure regulator, and 1-1/2" air filter.
Unit of Measure

Specifications

Brands

 N/A Apollo Clemco®

Grating Rating

 N/A 2000 lb/ft²

Storage Hopper Size

 N/A 6 ft³

Voltage

 N/A 460 V

Number of Phase

 N/A 3

Frequency

 N/A 60 Hz

Includes

Includes

 N/A
  • Abrasive/media to be used: Lightweight abrasives such as glass bead, alox up to 36 grit, others less than 140 lbs/cu ft
  • Upcharge for 60-degree conical bottom on blast machine and M-section®s: Option: For plastic media and starch media applications
  • Recovery unit: M-Section® recovery assembly
  • Surface-mount ramp plates order separately
  • Media reclaimer for pneumatic recovery: 900 cfm with wear plate and adjustable vortex cylinder
  • Dust collector: Ventilates media reclaimer. Separate blast room dust collector must be ordered.
  • Industrial blast machine: 6 cu ft Stationary Blast Machine with fine-mesh Sentinel Metering Valve
  • Operator safety equipment order separately
  • Electrical control panel order separately
  • Start-up supervision order separately

Additional Information

Additional Information

 N/A Recovery system technologies are engineered to suit specific abrasive/media types. Best performance is achieved when the recovery technology is suitable for the abrasive/media to be used and when a dedicated dust collector is installed to ventilate the abrasive/media cleaning system. Abrasive cleaner/reclaimer dust collection is especially critical when using aggressive abrasives, such as, aluminum oxide, silicon carbide, garnet, and others.

Important Note

Important Note

 N/A Blast Media: When ordering, advise media type and mesh-size; this information is critical to ensure equipment is configured for the application.

Dust Collection: The dust collector provided is to ventilate the media reclamation system. A separate dust collector must be installed to ventilate the blast room. The blast room dust collector must be ordered separately.

Operator Safety Equipment: Must be ordered separately.