Print Back
The Most Affordable & Dependable Dryer Available
Think Simple. Install a D-Series deliquescent dryer virtually anywhere. D-Series dryers are installed indoors or outdoors. For portability, D-Series dryer mount easily to trucks, trailers, and skid-packaged equipment. With no electrical components D-Series dryers operate safely in areas where explosive vapors are present. D-Series dryers are ideal for drying low pressure air no purge intermittent flows, and for point-of-use applications.
Unit of Measure

Specifications

Brands

Kleen Blast® Van Air Systems

Model

D72

Flow Rating

3500 scfm

Inlet/Outlet (I/O) Connection Size

6 in

Inlet/Outlet (I/O) Connection Type

Flange

Diameter

73 in

Height

110 in

Empty Weight

4500 lb

DRY-O-LITE® Per Unit

6000 lb

Dew Point Suppression

20 to 63 ºF

Maximum Capacities at 10 Pound Per Square Inch Gauge (PSIG) Pressure

754 scfm

Maximum Capacities at 25 Pound Per Square Inch Gauge (PSIG) Pressure

1059 scfm

Maximum Capacities at 60 Pound Per Square Inch Gauge (PSIG) Pressure

2279 scfm

Maximum Capacities at 100 Pound Per Square Inch Gauge (PSIG) Pressure

3500 scfm

Maximum Capacities at 125 Pound Per Square Inch Gauge (PSIG) Pressure

4263 scfm

Maximum Capacities at 150 Pound Per Square Inch Gauge (PSIG) Pressure

5789 scfm

Recommended Prefilter

F101-3500-B

Recommended Afterfilter

F101-3500-RB

Applications

Applications

  • Industrial plant air
  • Blast rooms and paint booths
  • Rail yards
  • Landfill gas and digester gas
  • Ready mix, cement, and asphalt plants
  • Sawmills and wood production

Features and Benefits

Features and Benefits

  • Low cost
  • No power required and no moving parts
  • 10 year vessel warranty
  • Prevent air line freeze-ups
  • No purge loss

How Does It Work?

How Does It Work?

Wet compressed air enters the bottom of the dryer vessel and flows through a bed of DRY-O-LITE® desiccant. DRY-O-LITE® acts like a sponge and absorbs water vapor from the air. Over time the desiccant slowly deliquesces, or (dissolves), and forms a liquid that falls into the bottom of the vessel's liquid reservoir. Dry compressed air exits the top of the dryer. Maintenance is easy. Drain liquid from the dryer at least once per eight hours of operation. Add new DRY-O-LITE® desiccant every 4-6 weeks or when desiccant falls below the sight windows.

Recommended Accessories

Recommended Accessories

29-0200, Pressure TemPerature Gauge ($120.00)