Print Back
These CLEMCO blast nozzles are venturi shaped with a tungsten carbide liner, natural rubber jacket and dual-compound hard rubber threads.
Thread size and entry dimensions vary with nozzle series.
Includes one nozzle washer.


Purpose
A blast nozzle accelerates the air and abrasive as the mixture exits the end of the hose.
The taper and length of the nozzle's inlet and outlet determine the pattern and velocity of the abrasive exiting the nozzle.
The composition of the liner material determines its resistance to wear.

Description of Operation
The operator inserts the nozzle washer into a holder and screws in the nozzle, turning it by hand, until it seats firmly against the washer.
With all related equipment correctly assembled and tested, the operator points the nozzle toward the surface to be cleaned and presses the remote control handle to begin blasting.
The operator holds the nozzle and moves it smoothly at a rate that produces the desired cleanliness.
Each pass should overlap slightly.
The operator must replace the nozzle once the orifice wears 1/16-inch beyond its original size.

Packaging: Boxed individually
Unit of Measure

Specifications

Brands

N/A Apollo Clemco®

Model

N/A TMP-8

Thread Type

N/A Contractor Thread

Nozzle Orifice

N/A 1/2 in

Flow Rate at 100 Pounds Per Square Inch (psi) Pressure

N/A 338 ft³/min

Length

N/A 9-3/4 in

Washer

N/A NW-25

Entry Size

N/A 1 in

Jacket Material

N/A Rubber

Weight

N/A 2.5 lb

Note

Note

N/A All threaded nozzles include one nozzle washer.