Clearance Specials
Small Cylinders
20 ppm CO, zero air, regulator, tubing, and hard case, 17 liter size disposable cylinders.
Unit of Measure

Specifications

Brands

Kleen Blast®

Direct Current (DC) Voltage

9 V

Optional Alternating Current (AC) Voltage

230 V

Country of Origin

USA

Certification

CSA Approved for Class I, Division 1, Groups C and D environments (9 VDC operation only)

How Often Should I Calibrate The Monitor?

How Often Should I Calibrate The Monitor?

Air Systems recommends calibrating our CO and CO/O2 Series breathing air monitors monthly. If monthly calibrations are not followed, the monitor should be recalibrated at least every six months from the last calibration prior to use.
Zero Air - When calibrating the monitor, Zero Air is used to achieve a true zero reading on the monitor before using the Carbon Monoxide (CO) test gas. Zero air removes all background interference gasses.
Carbon Monoxide (CO) - Use only 10-20 ppm CO gas for calibration. Using a higher CO concentration may decrease accuracy at lower scale readings. Note: 10 ppm gas must be used to satisfy Canadian calibration requirements.
Oxygen (O2) - For CO/ O2 monitor, use only 20.9% oxygen in nitrogen gas for calibration.

Features

Features

  • Visual Air Flow Meter to Monitor
  • High Intensity Audible Alarm (120 dBA)
  • Carbon Monoxide Monitor
  • 115 VAC Remote Alarm Connections

Also Available

Also Available

  • Intrinsically Safe Models
  • Remote Audible and Visual Alarms
  • CO/O2 Monitor