The Apollo 60 LP is a Type CE, continuous flow, supplied-air respirator with Constant-Flow Connector for abrasive blasting, for use with an ambient air pump. The high visibility red Apollo 60 LP is a double-shell helmet, with a full-view window, and a protective cape.
The Occupational Safety and Health Administration (OSHA) has Assigned Apollo Helmets a Protection Factor of 1,000 Times the Exposure Limit for Lead Dust.
Specifications
Requirement for Operation
N/A
The following items are required or recommended for operation, but are not included with this respirator: |
Advantages
N/A
|
Description of Operation
N/A
|
Approval and Certifications
N/A The Apollo 60 LP helmet is a NIOSH- approved type CE respirator (approval number TC# 19C - 358) and is recognized by OSHA as having an assigned protection factor (APF) against lead dust of 1000 times the permissible exposure limit (PEL). It also meets the American National Standards Institute (ANSI) requirement for hard hat protection. |
Purpose
N/A
The Apollo 60 LP is designed for use with an ambient air pump. It meets OSHA standards for respiratory protection and noise limitations. The Apollo 60’s full-helmet design protects the blast operator’s head from rebounding abrasive and from construction-site impact hazards. |
Note
N/A For safe, efficient blasting, read and follow the owner's manual and seek training for everyone who will use this equipment. |
Application Alert
N/A Respirators are not approved for use in any atmosphere immediately dangerous to life or health or from which the wearer cannot escape without the aid of the respirator. Before using any respirator, make sure that any airborne contaminants are not in concentrations that are in excess of those allowed by applicable OSHA or EPA regulations or NIOSH recommendations. Consult the product literature and owner's manuals for information concerning the proper function, use, and maintenance of these respirators. |