Clearance Specials
Flex™ Base Units with Millennium ACS Pneumatic Remote Controls
Flex™ units are for blasting at pressures from 50 to 120 psi. Low Pressure (LP) Flex™ units have an extended blasting pressure range from 5 to 120 psi. LP units allow frequent start/stop, maintaining lower blast pressure.
All base units come with two injector bodies (choice of 1-1/4" fine thread or Contractor 50mm thread); one to be located at the metering valve and an alternate that can be installed at the nozzle. Always observe appropriate nozzle-orifice-to-blast hose size ratio when choosing nozzle for use with the Flex™.
Flex™ units are for blasting at pressures from 50 to 120 psi. Low Pressure (LP) Flex™ units have an extended blasting pressure range from 5 to 120 psi. LP units allow frequent start/stop, maintaining lower blast pressure.
All base units come with two injector bodies (choice of 1-1/4" fine thread or Contractor 50mm thread); one to be located at the metering valve and an alternate that can be installed at the nozzle. Always observe appropriate nozzle-orifice-to-blast hose size ratio when choosing nozzle for use with the Flex™.
Unit of Measure
Specifications
Brands |
N/A Clemco® Kleen Blast |
Thread Type |
N/A Contractor (50 mm) |
Pressure |
N/A 50 to 120 psi |
Weight |
N/A 1,500 lb |
Includes |
N/A Base unit includes 6 cu.ft blast machines, pneumatic remote controls with abrasive cut-off, wetblast injector pump assembly, 120-gallon water tank, 1 base unit injector, 1 nozzle injector, blast machine screen and cover, pressure regulator and air filter. Order nozzle and coupled blast hose separately. |
