Clearance Specials
Request Information
The Most Affordable & Dependable Dryer Available
Think Simple. Install a D-Series deliquescent dryer virtually anywhere. D-Series dryers are installed indoors or outdoors. For portability, D-Series dryer mount easily to trucks, trailers, and skid-packaged equipment. With no electrical components D-Series dryers operate safely in areas where explosive vapors are present. D-Series dryers are ideal for drying low pressure air no purge intermittent flows, and for point-of-use applications.
Unit of Measure

Specifications

Brands

 N/A Kleen Blast® Van Air Systems

Model

 N/A D138

Flow Rating

 N/A 16000 scfm

Inlet/Outlet (I/O) Connection Size

 N/A 10 in

Inlet/Outlet (I/O) Connection Type

 N/A Flange

Diameter

 N/A 139-1/2 in

Height

 N/A 154-3/4 in

Empty Weight

 N/A 15500 lb

DRY-O-LITE® Per Unit

 N/A 27000 lb

Dew Point Suppression

 N/A 20 to 63 ºF

Maximum Capacities at 10 Pound Per Square Inch Gauge (PSIG) Pressure

 N/A 2692 scfm

Maximum Capacities at 25 Pound Per Square Inch Gauge (PSIG) Pressure

 N/A 4327 scfm

Maximum Capacities at 60 Pound Per Square Inch Gauge (PSIG) Pressure

 N/A 7051 scfm

Maximum Capacities at 100 Pound Per Square Inch Gauge (PSIG) Pressure

 N/A 16000 scfm

Maximum Capacities at 125 Pound Per Square Inch Gauge (PSIG) Pressure

 N/A 19485 scfm

Applications

Applications

 N/A
  • Industrial plant air
  • Blast rooms and paint booths
  • Rail yards
  • Landfill gas and digester gas
  • Ready mix, cement, and asphalt plants
  • Sawmills and wood production

Features and Benefits

Features and Benefits

 N/A
  • Low cost
  • No power required and no moving parts
  • 10 year vessel warranty
  • Prevent air line freeze-ups
  • No purge loss

How Does It Work?

How Does It Work?

 N/A Wet compressed air enters the bottom of the dryer vessel and flows through a bed of DRY-O-LITE® desiccant. DRY-O-LITE® acts like a sponge and absorbs water vapor from the air. Over time the desiccant slowly deliquesces, or (dissolves), and forms a liquid that falls into the bottom of the vessel's liquid reservoir. Dry compressed air exits the top of the dryer. Maintenance is easy. Drain liquid from the dryer at least once per eight hours of operation. Add new DRY-O-LITE® desiccant every 4-6 weeks or when desiccant falls below the sight windows.

Recommended Accessories

Recommended Accessories

 N/A , Pressure TemPerature Gauge ($120.00)