Clearance Specials
Request Information
The Most Affordable & Dependable Dryer Available
Think Simple. Install a D-Series deliquescent dryer virtually anywhere. D-Series dryers are installed indoors or outdoors. For portability, D-Series dryer mount easily to trucks, trailers, and skid-packaged equipment. With no electrical components D-Series dryers operate safely in areas where explosive vapors are present. D-Series dryers are ideal for drying low pressure air no purge intermittent flows, and for point-of-use applications.
Unit of Measure

Specifications

Brands

 N/A Kleen Blast® Van Air Systems

Model

 N/A D16

Flow Rating

 N/A 155 scfm

Inlet/Outlet (I/O) Connection Size

 N/A 2 in

Inlet/Outlet (I/O) Connection Type

 N/A National Pipe Thread (NPT)

Diameter

 N/A 16 in

Height

 N/A 55 in

Empty Weight

 N/A 145 lb

DRY-O-LITE® Per Unit

 N/A 250 lb

Dew Point Suppression

 N/A 20 to 63 ºF

Maximum Capacities at 10 Pound Per Square Inch Gauge (PSIG) Pressure

 N/A 33 scfm

Maximum Capacities at 25 Pound Per Square Inch Gauge (PSIG) Pressure

 N/A 47 scfm

Maximum Capacities at 60 Pound Per Square Inch Gauge (PSIG) Pressure

 N/A 101 scfm

Maximum Capacities at 100 Pound Per Square Inch Gauge (PSIG) Pressure

 N/A 155 scfm

Maximum Capacities at 125 Pound Per Square Inch Gauge (PSIG) Pressure

 N/A 189 scfm

Maximum Capacities at 150 Pound Per Square Inch Gauge (PSIG) Pressure

 N/A 223 scfm

Maximum Capacities at 200 Pound Per Square Inch Gauge (PSIG) Pressure

 N/A 290 scfm

Maximum Capacities at 250 Pound Per Square Inch Gauge (PSIG) Pressure

 N/A 358 scfm

Recommended Prefilter

 N/A F200-150-1-B-MD-PD6

Recommended Afterfilter

 N/A F200-150-1-RB-MD-PD6

Applications

Applications

 N/A
  • Industrial plant air
  • Blast rooms and paint booths
  • Rail yards
  • Landfill gas and digester gas
  • Ready mix, cement, and asphalt plants
  • Sawmills and wood production

Features and Benefits

Features and Benefits

 N/A
  • Low cost
  • No power required and no moving parts
  • 10 year vessel warranty
  • Prevent air line freeze-ups
  • No purge loss

How Does It Work?

How Does It Work?

 N/A Wet compressed air enters the bottom of the dryer vessel and flows through a bed of DRY-O-LITE® desiccant. DRY-O-LITE® acts like a sponge and absorbs water vapor from the air. Over time the desiccant slowly deliquesces, or (dissolves), and forms a liquid that falls into the bottom of the vessel's liquid reservoir. Dry compressed air exits the top of the dryer. Maintenance is easy. Drain liquid from the dryer at least once per eight hours of operation. Add new DRY-O-LITE® desiccant every 4-6 weeks or when desiccant falls below the sight windows.

Recommended Accessories

Recommended Accessories

 N/A , Pressure TemPerature Gauge ($120.00)
, MDV Series 1 Inch (in) Connection Size and 600 Pound Per Square Inch Gauge (psig) Maximum Allowable Working Pressure (MAWP) Motorized Ball Valve ($1,075.00)