Clearance Specials
Request Information
The Most Affordable & Dependable Gas Dryer Available
As the industry leader in deliquescent desiccant technology, Van Gas Technologies has designed Pipeline Deliquescent Dryers (PLD) to be an economical and effective solution for natural gas dehydration. Standard single-tower Pipeline Dryers are available with maximum working pressures of 280 PSIG to 1450 PSIG, and flow capacities up to 15.2 MMSCFD. Gas dryers rated for higher pressures and flow rates are available on an engineered to order basis. PLD Series dryers provide a low cost solution for moisture removal from natural gas for everyone from the shallow home well operators to large producers of natural gas.
Unit of Measure

Specifications

Brands

 N/A Kleen Blast® Van Air Systems

Model

 N/A PLD20-14.5

Maximum Allowable Working Pressure (MAWP)

 N/A 1450 psig

Inlet/Outlet (I/O) Connection Size

 N/A 2 in

Inlet/Outlet (I/O) Connection Type

 N/A National Pipe Thread (NPT)

Diameter

 N/A 20 in

Height

 N/A 94-3/8 in

Weight Empty

 N/A 1260 lb

Prime Direct On-Line (DOL)

 N/A 464 lb

Set Point (SP)/Peak

 N/A 355 lb

Maximum 10 Bar Full (BF)

 N/A 387 lb

Ceramic Bead Pre-Bed

 N/A 83 lb

Maximum Capacities at 10 Pound Per Square Inch Gauge (PSIG) Pressure

 N/A 67 mscfd

Maximum Capacities at 25 Pound Per Square Inch Gauge (PSIG) Pressure

 N/A 107 mscfd

Maximum Capacities at 50 Pound Per Square Inch Gauge (PSIG) Pressure

 N/A 175 mscfd

Maximum Capacities at 100 Pound Per Square Inch Gauge (PSIG) Pressure

 N/A 310 mscfd

Maximum Capacities at 200 Pound Per Square Inch Gauge (PSIG) Pressure

 N/A 581 mscfd

Maximum Capacities at 280 Pound Per Square Inch Gauge (PSIG) Pressure

 N/A 798 mscfd

Maximum Capacities at 500 Pound Per Square Inch Gauge (PSIG) Pressure

 N/A 1393 mscfd

Maximum Capacities at 720 Pound Per Square Inch Gauge (PSIG) Pressure

 N/A 1988 mscfd

Maximum Capacities at 1450 Pound Per Square Inch Gauge (PSIG) Pressure

 N/A 3964 mscfd

Vessel Warranty

 N/A 10 years

Recommended Filter

 N/A GF105-3964-2-*-14.5

Note for Recommended Filter

 N/A Note when ordering a Filter please select whether it needs to be particulate (p)or coalescing(c). Consult Factory for filter options for all PLD 2.8 models.

Applications

Applications

 N/A
  • Natural gas dehydration at wellheads
  • Dry fuel gas
  • Inhibit hydrate formation
  • Protect meters, regulators and other instruments

Features and Benefits

Features and Benefits

 N/A
  • Stop freeze-ups and hydrate formation
  • No power required and no moving parts
  • Meets pipeline moisture specifications
  • No purge loss

How Does It Work?

How Does It Work?

 N/A Wet gas contacts the pre-bed, which is coated with desiccant solution. This area removes mist or droplets too small for mechanical separation. In addition, the hygroscopic desiccant solution on the extended surface of the pre-bed starts the drying process. Further moisture removal occurs in the desiccant bed where the remaining water vapor is removed from the gas. The desiccant tablets at the top of the bed serve as a backup supply. At the outlet, the gas is free of liquid water. Moisture vapor is substantially reduced and hydrate formation is eliminated.

Replacement Dryer Parts

Replacement Dryer Parts

 N/A , 6 Inch (in) Fill Cover O-Ring ($30.00)

Additional Information

Additional Information

 N/A Did you know?
Van Air Systems sells natural gas dryers and desiccant under the name Van Gas Technologies. The PLD Series dryers are the primary line of gas drying vessels and can be installed in a variety of natural gas dehydration applications.

Call on your gas producers!